Teeth implantation

Qualitative. Fast. Painless

When dental implantation is necessary?


Implantation is necessary if native teeth are lost due to disease or mechanical damage, which negatively affects a person's confidence during communication, creates discomfort


The absence of one or more teeth can lead to problems with chewing food and malocclusion formation


Missing teeth increases the occlusal load on other teeth, so they quickly wear out, and this leads to other diseases and even tooth loss

A few things about implants

Dental implant – is a tooth root analogue. It is made of a special titanium alloy, with which our hard tissue has an absolute biocompatibility. Therefore, the implant survival is 99.6%. The very procedure of the implant placement is performed by a dental surgeon after careful treatment planning based on the analysis of computer tomogram data and other diagnostic procedures. The implant placed is overgrown with hard tissue for 3-6 months (endured). The implant adherent to the bone tissue is first built up with the so-called abutment, and then a crown is fixed on the abutment. The crown completely restores the function and aesthetics of the lost tooth.

We have the best implants

Around 300 different implant systems have been registered worldwide. However, it is possible to outline some systems that are rich in their history, traditions, scientific research, developments and unsurpassed quality standards. Our clinic works with two main systems: 1) the Swiss Nobel Biocare system, which for more than 50 years since the discovery of this treatment method has been offering the most advanced and innovative solutions in implantology; 2) the German Impro Implantem system, manufactured by Helmut Klingel GmbH, which began its operation in 1986

The best implant crown

There are several options for restoring the implant survived. First of all, there is a difference in the abutments (the agent for the implant restoration). Currently best available abutments are individual zirconium abutments. First, they completely restore function and perfect aesthetics, and secondly, are biocompatible, since zirconium prevents the plaque formation on its surface. With regard to the crown, the zirconium abutment is best suited for a zirconium crown. It has the same excellent aesthetic characteristics and prevents the plaque formation on its surface.

Stages of work with patients on the dental implant placement

Diagnosis and treatment planning

At this stage, prosthetics and implantation in the area of ​​missing teeth are planned based on the 3D model.

Surgical procedures

The implant is placed immediately or after a short time after the tooth extraction. The period of complete wound healing after surgery is an average of 2 weeks


Orthopedic treatment

In 3-6 months, the implant will survive. Following that, the abutment is screwed into the implant. It is to abutment that the crown is attached. The crown restores the lost tooth

The main stages of the dental implant procedure

Implant placement

Healing cap screwing

Abutment attachment

Crown placement

Clinical implantation example

After three months following the extraction of the teeth, 3 implants were placed

After 3 months, the implants will survive and healing abutment will be attached

Then, temporary crowns are placed on the implants, which correctly form the gum around the implants

Within 3 weeks, the gum around the implants is completely formed, repeating the contour of natural teeth

The manufacture of permanent crowns begins with the manufacture of the so-called zirconium abutments repeating tooth contours

After that zirconium crowns are prepared for zirconium abutments, restoring lost teeth

The entire process from the tooth removal until its complete restoration on the implant took 8 months

Appointment to the doctor

Implantation systems in “Dental Profi”

Wide range of choice for any case

Nobel Biocare offers implants designed to help patients in variuos situations

High primary stabilization

Suitable for complex clinical cases, for example, when one-stage implantation and immediate loading are required

Maximum aesthetics

The implant shape and functional qualities are designed to maximize the volume of bone and soft tissue and achieve excellent aesthetic results

Improved osseointegration

The unique patented oxidized TiUnite surface provides high implant stability during healing through faster bone formation and contributes to the long-term treatment success

Lifetime warranty

Most Nobel Biocare implants are provided with a lifetime warranty


Suitable for working with the bone of any structure

High survival rates

In 2-3 months, the artificial root completely gets fused with the bone due to the special product surface made using the three-dimensional etch technology

Immediate implantation

Implant can be placed immediately after the affected tooth removal

Ideal in case of bone tissue deficiency

The implantation system, if necessary, allows combining the two operations: implantation and sinus-lifting, during the surgical interventions bone tissues are traumatized minimally, preserving their integrity

Anatomical shape

Currently, the implantation is a very popular method of restoring lost teeth in the dental service market. Due to the high competition, many clinics try to offer the lowest possible price, which cannot but affect the savings in materials, equipment, components, etc. Of course, this all leads to unsuccessful results: implant failure both during surviving, and after some time after the crown placement.

The implant survival rate is 99.6%, which indicates a more than successful outcome. The implantation method is a technologically complicated procedure, requiring considerable time, energy and finance from the patient. Minor savings and the use of budgetary treatment options can ultimately lead to failure. We recommend using the most modern implantation techniques, which will give you the opportunity to use your new tooth all your life.

Kulaga Oksana Igorevna

Dentist-surgeon, implantologist of the "Dental Pro" clinic

Interesting and useful information

Preparation for implantation
The very procedure of implantation (or simply implant placement) is quite predictable. If you are interested in this method of the dentition restoration, it is necessary first of all to make an appointment and to consult for preliminary planning of implantation. For a more accurate diagnosis and treatment planning it is necessary to make a three-dimensional X-ray examination. So as not to lose, first of all, your time, in the “Preparation for implantation” section there is the necessary information, by downloading and printing of which you'll be able to make all the preliminary studies

Tests for implantation

Appointment for X-ray examination

Preoperative recommendations (implantation)

Implantation procedure

In a clear example, we will analyze the implantation procedure. Suppose that there a single lateral missing tooth in the jaw.
Имплантация 1-2

Over time, if nothing is done to restore it, then the bone tissue will gradually atrophy (decrease), and there are various kinds of dental deformity in the form of teeth protrusion, displacement, etc., because of the lack of their support. This in the future will further complicate the tooth restoration, and will require additional time and financial losses.

Имплантация 3

In case of satisfactory conditions for implantation, the implant is placed into the bone first. The procedure itself takes no more than 30-60 minutes. At the end of the operation, the implant is tightly stitched with the mucosa. In a week after the wound healing, the stitches are taken out.

Имплантация 4

Then for 4-6 months the implant “is surviving” on the upper jaw (on the underjaw for – 3 months), that is, overgrown with bone. After this, it is opened and a special healing screw is screwed into. After two weeks, the implant “building” with a special abutment and the crown placement can be performed.

Имплантация 5

Thus, implantation “on a turn-key basis” includes the implant itself, the abutment and the crown on the abutment.

Имплантация 6

Implantation in an aesthetically significant zone

Now consider the stages of the dentition restoration by implantation in an aesthetically significant zone. Suppose that there is no central incisor on the upper jaw.

Имплантация 7-8

With long missing tooth there is a gradual atrophy (i.e. decrease) of the jaw bone, which subsequently can affect the good aesthetic result of the implant prosthesis. The bone in the anterior part of the jaw is thin, and its restoration takes a long time and does not always have good results. Therefore, it is very important after the extraction to proceed with the implant placement, and even better, when the dental implantation is performed simultaneously with the removal of the tooth (under the necessary conditions).

Имплантация 9

In the presence of conditions for implantation, which is most often associated with the presence of sufficient bone tissue, an implantation is performed. Very often, especially with dental injuries, the implantation procedure is carried out simultaneously with the removal of the tooth. This allows preserving the “precious” bone, and therefore getting a good aesthetic result after prosthetics. Depending on the situation, the implant is either tightly stitched with the gingival mucosa, or immediately a temporary crown is attached. After the wound healing (usually 7-10 days) the stitches are taken out.

Имплантация 10

After the implant surviving (after 4-6 months on the upper jaw, after 3 months – on the lower jaw), the prosthetics procedure can be started. Under the traditional technique, prosthetics on the implant completes with the manufacture of a porcelain-fused-to-metal dental crown on a standard or individual titanium abutment.

Имплантация 11

However, in this case, it is not always possible to perform aesthetic restoration. In the anterior part the gum mucosa is often very thin. Therefore, very often the metallic abutment shines through the thin gum. The porcelain-fused-to-metal dental crown also does not allow transferring all the aesthetic parameters inherent in native teeth.

Имплантация 12

In the Mitino “DentAl Profi” clinic in after implantation, the metal-free constructions are used for prosthetics. These include zirconium oxide and lithium disilicate. These materials can be manufactured in different shades of white, which will make it possible to create an aesthetic design. Metal-free crowns, due to their optical properties, accurately provide all the aesthetic parameters inherent in native teeth. Dental implantation in the “DentAl Profi” clinic in Mitino is carried out proceeding from the highest aesthetic requirements of our patients.

Имплантация 13-14

Оплата услуги
После оплаты Вам придет на почту именной сертификат с индивидуальным номером. Вам обязательно позвонят для записи на процедуру.